Pest Fox

Pest Fox · Termite work guided by AS 3660

Termite Treatments Adelaide

Termite treatment in Adelaide — chemical soil barriers, in-ground baiting, foam injection. Guided by AS 3660.2-2017, quoted in writing. Free quote.

  • AS 3660Inspections guided by
  • WrittenInspection reports
  • APVMARegistered products
  • FreeWritten quotes

Termite treatment eliminates an active termite colony and protects the building against the next one, using a soil treatment, a baiting system or both. Pest Fox treats homes across metro Adelaide and the Hills, guided by AS 3660.2-2017. Most treatments cost $800–$3,500 depending on the building. Start with an inspection through the quote form.

Termite treatment in Adelaide aims to eliminate an active colony and reduce the risk of the next one. Our work is guided by AS 3660.2-2017 (Termite management — in and around existing buildings) and uses APVMA-registered termiticides applied to the label. Treatments typically range from $800 for a single-spot remediation to $3,500 for a full perimeter chemical treatment on an established home, quoted in writing before work starts.

If you’ve already found termites, don’t disturb the workings. Disrupted colonies retreat and re-emerge somewhere harder to find. Book an inspection first, treat from a positive ID.

What termite treatment looks like in 2026

There isn’t one termite treatment — there are three families, picked by colony location, building type, and homeowner preference. We use whichever produces the structural outcome.

  • Liquid soil treatment / chemical barrier — non-repellent termiticide injected into the soil along the slab perimeter and at every penetration point. Foraging workers move through the treated zone, transfer the active to the colony, and the colony declines over the following weeks. It’s a strong option when the building layout permits.
  • In-ground baiting system — slow-acting bait stations installed at intervals around the building. Foraging termites consume the bait, return it to the colony, and the bait’s insect growth regulator works through the colony over a period of months. The chemical-light option for landscaped or paved properties. See termite baiting systems.
  • Direct nest treatment / foam injection — where the active workings are localised (a single architrave, a sub-floor stump, an isolated wall cavity), foam-based or dust-based termiticide is applied directly into the gallery. Used in combination with one of the systemic options above, never as the only treatment.

The wrong combination on the wrong building is how a $1,200 treatment becomes a $7,000 re-treatment 18 months later. The inspection drives the choice.

When termite treatment is needed

  • Active termites confirmed in an inspection report — workings, mud tubes, frass, or thermal/moisture anomalies with positive sounding tests
  • Damage found, no live workings visible — a remediated colony may have moved on; the building still needs treatment to close the entry corridor
  • Pre-treatment for a renovation or extension — opening up walls and slab penetrations is the moment to install retroactive protection
  • Failed previous treatment — bridged barrier, sub-standard original application, or a colony that’s re-emerged on the opposite elevation
  • Repeated mud tubes — even when no live workings are caught, repeat tubing means a foraging perimeter has reached your structure

Our treatment process

  1. Inspect — confirm species, colony location, and structural extent. Species such as Coptotermes, Nasutitermes and Schedorhinotermes behave differently, and the species informs the treatment.
  2. Report — written treatment plan with the chemical/system name, application method, areas treated, expected timeline to colony decline, and what’s included. AS 3660.2-2017 cited explicitly.
  3. Treat — a typical perimeter chemical treatment is a one-day job on a single-storey home. Baiting installations take half a day for the initial setup, then 4-weekly monitoring visits. Spot treatments are faster.
  4. Monitoring — follow-up inspections to confirm the colony has declined, then regular inspections no more than 12 months apart through our annual termite inspection program. Ask us what workmanship cover applies to your job — the terms are set out in your written quote.

Termite treatment cost in Adelaide

The typical price range for termite treatment in Adelaide is $800–$3,500. Where your job lands depends on:

  • Building size and perimeter length — chemical barrier costs scale with linear metres of treatment.
  • Slab type and access — internal-to-external slab cuts, paving lift-and-replace, and sub-floor crawl access all change labour.
  • Treatment system chosen — liquid soil treatment vs in-ground baiting vs combined approach.
  • Severity of the active infestation — a single localised colony differs from multi-elevation foraging.
  • Outbuildings included — sheds and carports inside the treatment perimeter add cost.

Spot remediations on a single architrave or pier can come in well under $800. A full chemical barrier with foam injection of three active colony sites on a brick-veneer two-storey in the eastern suburbs sits at the upper end of the band.

We quote in writing after inspection. We don’t quote treatment over the phone — anyone who does is guessing.

Common termite treatment systems

Only APVMA-registered termiticides, applied to the label — no off-label products, no homebrew. Systems commonly used on Adelaide homes include:

  • Termidor SC (fipronil) — non-repellent liquid termiticide, widely used for chemical soil treatments.
  • Premise (imidacloprid) — non-repellent alternative for chemical barriers; used where a fipronil product isn’t suitable.
  • Sentricon Always Active (noviflumuron) — in-ground baiting system with continuously active bait.
  • Exterra Termite Interception System (chlorfluazuron) — in-ground baiting alternative; UV-stable bait matrix.
  • Termidor Foam / Dust — direct injection into active workings; supplements perimeter treatments.

Every chemical used is registered with the Australian Pesticides and Veterinary Medicines Authority (APVMA) and applied to label conditions. In SA, anyone applying pesticides for payment must hold an SA Health Pest Management Technician licence.

What happens after treatment

A treated colony doesn’t die overnight. Liquid treatments typically work over weeks; baiting usually takes months. During that window:

  • Don’t disturb the treatment zone — irrigation reticulation, garden mulching, soil disturbance against the slab edge can compromise the barrier
  • Don’t bridge the treated soil with timber, mulch, or soil heaps
  • Re-inspection at 6 months for active treatments confirms colony decline
  • Regular re-inspection (no more than 12 months apart) checks for re-infestation — many product and installer warranties also require it

If you’re considering a permanent retro-fit barrier — chemical reticulation pipework around the slab perimeter that lets us replenish the active without re-trenching — see termite barriers.

Where we treat

We treat across the eastern, western, northern, and southern Adelaide suburbs and the Adelaide Hills foothills. Highest job density is in the older heritage corridors — Norwood, Unley, Prospect, Walkerville, Semaphore, and the Port Adelaide–Largs Bay band — where many homes were built before modern termite-management standards. Foothills properties (Mitcham, Belair, Stirling, Aldgate) carry secondary risk from bushland-edge colonies. Full coverage on the locations hub.

Specialised treatment services

Guides from our blog

FAQs about termite treatment in Adelaide

Q: How much does termite treatment cost in Adelaide? A: Termite treatment in Adelaide runs $800–$3,500 depending on building size, slab and access conditions, treatment system, and severity. Spot remediations come in lower; full perimeter barriers with multi-site foam injection sit at the upper end. We quote in writing after the inspection — never over the phone.

Q: How long does termite treatment take? A: A perimeter chemical treatment is typically a one-day job. In-ground baiting installation is half a day, then 4-weekly monitoring. The colony itself takes 4–8 weeks to decline on liquid systems, 3–6 months on baiting.

Q: Is termite treatment safe for kids and pets? A: Yes, when applied correctly. We use APVMA-registered termiticides applied to label conditions. Liquid soil treatments are injected into the soil at trench depth — there’s no surface residue once treatment finishes. Baiting stations are sealed in-ground units. We brief you on access timing on the day.

Q: What’s the difference between baiting and a chemical barrier? A: A chemical (soil) barrier is a non-repellent termiticide applied to the soil at the slab perimeter; foraging workers transit it and the colony collapses. Baiting uses an attractant + slow-acting active in stations on a 3-metre grid; the colony’s own foragers carry the active home. Barriers are faster and cheaper on accessible properties; baiting is the preferred choice on heavily landscaped, paved, or build-restricted blocks.

Q: Will termite treatment damage my garden? A: Liquid soil treatments require trenching at the slab perimeter — typically a 100–150mm trench backfilled and re-instated on the day. Established plants close to the perimeter may be lifted and replanted; we discuss this on the quote. Baiting installations require 50mm-diameter holes drilled at 3m centres and don’t disturb the garden surface beyond that.

Q: How long does a termite treatment last? A: A correctly installed chemical soil treatment can last several years — the product label and the treatment certificate set out the expected service life, and it can be shortened by soil disturbance. In-ground baiting is an active monitored system — it works as long as the stations are maintained on schedule. Either way, regular inspections (no more than 12 months apart) are how the protection stays current, and manufacturer warranties usually depend on them.

Q: Can I just buy something from Bunnings and treat it myself? A: Retail insect sprays may kill the termites you can see, but they won’t reach a colony that may be living underground some distance from your house — and spraying can drive activity elsewhere. Paid termite work in SA must be done under an SA Health Pest Controller’s licence by a licensed Pest Management Technician (Controlled Substances (Pesticides) Regulations 2017).

Inspect · Report · Treat · Follow up

How a Pest Fox termite job runs

  1. 01

    Inspect

    Inspection guided by AS 3660.2-2017. Thermal imaging, moisture meter and termite radar on any anomaly. Subfloor, roof void, perimeter.

  2. 02

    Report

    Written report following AS 4349.3-2010. Findings, evidence photos, recommended next step in plain English.

  3. 03

    Treat

    Treatment plan guided by AS 3660.2-2017. APVMA-registered products only. Re-entry windows explained. Quote in writing before any chemical goes down.

  4. 04

    Follow up

    Follow-up inspections, with an annual inspection schedule offered (AS 3660.2 calls for inspections no more than 12 months apart). Any warranty terms set out in writing.

FAQs about termite treatments in Adelaide

  • How much does termite treatment cost in Adelaide?

    Termite treatment in Adelaide runs $800–$3,500 depending on building size, slab and access conditions, treatment system, and severity. Spot remediations come in lower; full perimeter barriers with multi-site foam injection sit at the upper end. We quote in writing after the inspection — never over the phone.

  • How long does termite treatment take?

    A perimeter chemical treatment is typically a one-day job. In-ground baiting installation is half a day, then 4-weekly monitoring. The colony itself takes 4–8 weeks to decline on liquid systems, 3–6 months on baiting.

  • Is termite treatment safe for kids and pets?

    Yes, when applied correctly. We use APVMA-registered termiticides applied to label conditions. Liquid soil treatments are injected into the soil at trench depth — there's no surface residue once treatment finishes. Baiting stations are sealed in-ground units. We brief you on access timing on the day.

  • What's the difference between baiting and a chemical barrier?

    A chemical (soil) barrier is a non-repellent termiticide applied to the soil at the slab perimeter; foraging workers transit it and the colony collapses. Baiting uses an attractant + slow-acting active in stations on a 3-metre grid; the colony's own foragers carry the active home. Barriers are faster and cheaper on accessible properties; baiting is the preferred choice on heavily landscaped, paved, or build-restricted blocks.

  • Will termite treatment damage my garden?

    Liquid soil treatments require trenching at the slab perimeter — typically a 100–150mm trench backfilled and re-instated on the day. Established plants close to the perimeter may be lifted and replanted; we discuss this on the quote. Baiting installations require 50mm-diameter holes drilled at 3m centres and don't disturb the garden surface beyond that.

  • How long does a termite treatment last?

    A correctly installed chemical soil treatment can last several years — the product label and the treatment certificate set out the expected service life, and it can be shortened by soil disturbance. In-ground baiting is an active monitored system — it works as long as the stations are maintained on schedule. Either way, regular inspections (no more than 12 months apart) are how the protection stays current, and manufacturer warranties usually depend on them.

  • Can I just buy something from Bunnings and treat it myself?

    Retail insect sprays may kill the termites you can see, but they won't reach a colony that may be living underground some distance from your house — and spraying can drive activity elsewhere. Paid termite work in SA must be done under an SA Health Pest Controller's licence by a licensed Pest Management Technician (Controlled Substances (Pesticides) Regulations 2017).

Got pests, or worried about termites?

Same-day pest service or scheduled termite inspection across metro Adelaide. Free written quote.

Call Now Free Quote